Trailer Dinghy composite structure, with the possibility of self-construction.

Yacht project Lion 600 despite its small size, has a sufficiently large internal volume and high freeboard, this allows 4 crew members feel quite comfortable when sailing on inland waters and coastal areas of the seas. The boat can be easily transported on a trailer behind a car.

The interior is designed for maximum use of interior space, and ease of operation.

Height in the cabin is 1.5 m, the sides of sofas equipped, in the Central part is the keel box, which is based on a table, in working condition the table folds around the keel box and no space in the cabin. Nose has a double bed, two bunks located aft under the cockpit.

Galley the boat is equipped in the sliding block and in the inoperative position retracts under the cockpit, galley sink is provided closing the cutting table and gas stove. The gas cylinder is located in a separate insulated locker under the cockpit for storage of equipment and supplies, access is provided via a hatch from the deck.

For storage of supplies and equipment used lockers are located under the sofas. The yacht is provided a composting toilet.

Architecture and design of the boat, as simple as possible and designed with consideration of the ability to self-built, all the details of ship construction and siding, are made from flat sheets of marine plywood.

Developed cutting charts detail the yacht standard sheets of plywood for cutting on CNC machines.

Pre-cut parts are assembled on a flat base and connected with glue in the slot locks that requires no special experience assemblers and allows construction in a small room.

To build the yacht fairly standard set of hand tools.

Ideal for parents who want to introduce children to the work and for a short time to build a real boat with your own hands.

Sail Bermuda sloop 7/8 with wind sail area of 22 m2

All halyards and sheets are displayed in the cockpit for easy and safe management of the yacht.

A yacht equipped with water ballast retractable centerboard dagger type weighing 250 kg.

made of steel and filled with ballast. Mounted the steering wheel to the steering box is hung on the transom.

1. 

   Fully equipped and ready to sail.

2. Assembled chassis for self fitting.
3. Kit-set cut in the sheer size of the set of parts and trim for self-built.
4. Boat plans for amateur building.

Study plans contain the basic hull design drawings in JPG format, the plan area of the sail and cutting of sheets of plywood the size of 1220 x 2440

We offer cooperation to shipyards and companies that operate in the field of CNC cutting  for the production of a series of yachts Lion or kit sets.
email: [email protected]

[table id=21 /]