April 2018
Pasting of the yacht deck with fiberglass.
The construction of the yacht has been resumed, this week the deck of the yacht is peeled off by two layers of fiberglass based on epoxy resin, for pasting
A glass cloth with a weight of about 300 g / m2 is used
Before gluing the case, it must be wiped with an acetone-based solvent, this is necessary in order to degrease the case before gluing it.
For gluing the glass fabric is cut into pieces about 9 m long, after which it is laid in a dry form on the yacht’s body, after that the fabric is impregnated with resin and rolls to the hull of the yacht with a roller or rubber squeegee, special attention should be paid to the absence of air bubbles and impregnated tissue sections.
The adjacent sheets of fiberglass when laying on the hull of the yacht must overlap the early laid at a distance of about 100 mm.
